Each
enclosure is designed
with durability and
functionality in mind
incorporated with a high
cooling air flow system.
Cool air is drawn from
the front of the unit
through the hard drives
dissipating the heat
through the rear. Being
a modular design, all
EditPRO enclosures have
interchangeable parts.
This allows high use
items, such as the fan
or drives, that
potentially fail to be
quickly and easily
replaced.
FAN
AND COOLING
We
utilize quiet, reliable,
ball bearing fans which
are designed specially
for venting unnecessary
heat away from the hard
drives and enclosure.
SECURE CONNECTION
Included
in all our enclosures are SFF-8088
Mini SAS cables for a safe and
secure connection between the RAID
card and enclosure. For additional
strength this fixed latch cable
helps provide a stable connection
and protection against accidental
interruptions during your workflow.
This cable will not disconnect
unless you do so.
FRIENDLY INTERFACE
The
EditPRO uses a simple I2C connection (only with
Areca RAID cards) for fault and activity LED's.
There are independent LED for each drives to display
the status of each drives. It also uses a SFF-8088
MiniSAS connector for the controller card to the
enclosure.
sales@cineraid.com
| (714)-961-0800
| (714)-961-0899
|
Follow us on:
Copyright 2008 www.CineRAID.com All Rights Reserved.
Each
enclosure is designed
with durability and
functionality in mind
incorporated with a high
cooling air flow system.
Cool air is drawn from
the front of the unit
through the hard drives
dissipating the heat
through the rear. Being
a modular design, all
EditPRO enclosures have
interchangeable parts.
This allows high use
items, such as the fan
or drives, that
potentially fail to be
quickly and easily
replaced. 
We
utilize quiet, reliable,
ball bearing fans which
are designed specially
for venting unnecessary
heat away from the hard
drives and enclosure.
Included
in all our enclosures are SFF-8088
Mini SAS cables for a safe and
secure connection between the RAID
card and enclosure. For additional
strength this fixed latch cable
helps provide a stable connection
and protection against accidental
interruptions during your workflow.
This cable will not disconnect
unless you do so. 
The
EditPRO uses a simple I2C connection (only with
Areca RAID cards) for fault and activity LED's.
There are independent LED for each drives to display
the status of each drives. It also uses a SFF-8088
MiniSAS connector for the controller card to the
enclosure. 
(714)-961-0800
(714)-961-0899 
