I removed 3x
3TB drives to put in this enclosure. They were already formatted with a
bunch of files on each. Now that they're in the enclosure, Windows is
telling me to format them before it can read it. Why is it not
recognizing the files on these hard drives? I cannot format them, I will
lose all my data. Please help. Thank you much.
Answer
Make sure
the RAID mode switch are all set to the "OFF" position, getting you into
"Normal" mode. USB will recognize all the individual drives. For eSATA
connectivity, you will need a host with port multiplier support.
sales@cineraid.com
| (714)-961-0800
| (714)-961-0899
|
Follow us on:
Copyright 2008 www.CineRAID.com All Rights Reserved.
(714)-961-0800
(714)-961-0899 
