Multi-Workstation using a SAS Switch

Single Or Dual Workstation - No SAS Switch

• Dual Core 800 Mhz RAID-On-Chip Storage Processor
• Advanced PCI-Express 3.0 bus architecture
• Supports up to 8GB DDR3 ECC registered  - DIMM socket (4GB Included by default)
• Hardware RAID 6 engine to support extreme performance RAID 6 function
• Support Global Hot Spare and local Hot Spare disk
• Optional Battery Backup Module preserves cache contents during power failure
• NVRAM and Real Time clock support, for configuration and transaction log
• 1x down-stream Mini-SAS supported, It can connect more SAS JBODs for capacity expansion

RAID Architecture

• Dual Core 800Mhz RAID-On-Chip Storage Processor
• 4GB DDR3 ECC Registered on one DIMM socket (Optional 8GB Available)
• Advanced PCI Express 3.0 buses architecture
• NVRAM and Real Time Clock supported

RAID Operation

• RAID levels: 0, 1 1E, 3, 5, 6, 50, 60 & JBOD
• Multiple RAID selection
• Online RAID level/stripe size migration
• Online Array roaming
• Support Global Hot Spare and dedicated Hot Spare disk
• Online capacity expansion and RAID level migration simultaneously
• Instant availability and background initialization
• Uniquely features "Drive Spin Down" saving more power consumption
• Automatically starts bad Blocks-Scrubbing by "Scheduled Volume Checking"
• Max 122 Physical drive support (with additional SAS Expander JBODs)
• Online Volume set growth
• Max 128 LUNs (Volume Set) per controller
• Support S.M.A.R.T., NCQ & OOB Staggered Spin-UP capable drives
• Automatic drive insertion / removal detection and rebuilding

Host Interface

• Two MiniSAS (SFF-8088) connectors - 6Gb/s x4 links per controller

Drive Interface

• 16x 6Gb/s SAS/SATA channel - Through Backplane
• Lockable disk carrier can support both 2.5" or 3.5" drives
• 1x MiniSAS (SFF-8088) port for expansion

RAID Management

• Field-Upgradeable firmware in flash ROM
• Firmware-embedded SMTP manager monitors all system events and user can select either single or multiple user alerts to be sent via email
• Firmware embedded Web Browser based RAID manager via Ethernet port

Monitors / Indicators

• LCD control panel for setup, alarm mute and configuration
• System status indication through LCD, LED and alarm buzzer
• All system events can be sent to multiple user alerts via email
• Firmware-embedded SNMP agent permits the remote to monitor all events through LAN with no SNMP agent required.

Cooling

• Two redundant, hot-swappable cooling modules with self-regulating speeds and wide range airflow tunnel  design
• Controlled by RAID controller, automatically maintains optimal ambient temperature for peak drive performance

Power Supply

• Redundant Dual 500W power modules - PFC rated 80Plus Energy-efficient, Load-Sharing, Hot-Swappable and cable-less design
• AC Voltage 110-230 VAC/AC Frequency 50-60Hz

Temperature

• Operating Temperature: 5 - 35 degree C
• Non-Operating Temperature: -40 - 60 degree C
• Relative Humidity: 20% - 80% non-condensing

Size & Weight

• Dimensions: 17.5"(w) x 20"(d) x 3U(h)
• Weight: 45lbs (Without Drives)